CHANGZHOU LIANGRU INTERNATIONAL TRADE CO., LTD.
CHANGZHOU LIANGRU INTERNATIONAL TRADE CO., LTD.
Add to Cart
Ebb And Flow ABS Aquaponics Grow Bed Plastic Rolling Greenhouse Bench
Aquaponic Grow Bed is a plastic structure of the bed surface of the cultivation bed, the bed surface is made of plastic tidal seedling plate, it is also known as the bottom irrigation cultivation bed. The tidal irrigated mobile seedbed uses basically the same columns and supports as commercial metal structure beds, and the bed surface is moulded with impervious plastic seedling trays. For irrigation, the tray is filled with clear water or nutrient solution and retained for a certain amount of time so that the crop can absorb water by capillary action through the drain hole at the bottom of the pot. The irrigation water is then discharged from the beds, collected and reused, or directly into the local sewer.
| Name | Aquaponic Grow Bed | |||
| Standard tray Size | 4*8ft(1.22m*2.44m) 5*5.6ft(1.53m*1.7m) 5.4ft×11.8ft(1.65m×3.6m) 5.6*14.6ft (1.7*4.45m) | |||
| All bench width | width 2.3ft,3ft, 4ft, 5ft, 5.6ft, 5.83ft, splice any length (customized) | |||
| Bench Standard height | About 70cm, can adjust 8-10c(other height can be customized) | |||
| Move distance | Move 25-30cm(each side) | |||
| Material | ABS tray Aluminum alloy frame Hot galvanized leg | |||
| UV protective ability | Yes | |||
| Color | White, Gray or Black | |||
| Load Range | 45-50kg/m2 | |||
| |